E-Clips Surge Suppression products for Telephone Systems
DLT 1P or 2P or 3P or 4P (XXX): This unit is a parallel hardwire device and should be installed at the box where the telephone service enters the building depending on how many lines come into the building i.e. DLT 1P 200 for a single line with ring voltage, DLT 2P 200 for two lines with ring voltage (xxx) = Specify Voltage Required: 15V, 30V, 60V or 200V. Other voltages available on request. (15V, 30V and 60V are typically used on leased or dedicated lines. 200V is used for ring-up lines.)
DLT 3S 200: Is an in-line series Modular RJ11 plug-in multi-stage hybrid device for your Telephone, Answering Machine, Fax, and Modem ring- up lines.
DLT TOS 200: Is an in-line screw terminal multi-stage hybrid device for your Telephone, Answering Machine, Fax, or Modem ring-up lines. (Note: optional voltages available: 15V, 30V, 60V are typically used on leased or dedicated lines. 200V is used for ring-up lines.)
1PRJ11: If your power side of the system is connected by plug-into 110-volt AC, this unit has one outlet and should be installed in front of the plug-in transformer.
1208CS: Are 110-volt AC 8 outlet plug-in power strip protector for the step down transformers, monitors, recorders, multi-plexers, switchers, amplifiers etc.
ILDCP Series Models: These are UL listed 497B in-line series screw terminal multi-stage hybrid devices. These units are designed to protect the equipment with its close clamping ability at high-induced voltages. There is a ground lug provided. Only use if you have a common ground i.e. single ground for entire system to prevent ground loops
3NF or 1208CS or 1PRJ11: Or 1P are 110 volt AC plug-in devices for KSU and PBX, modems, answering machines, cordless phones, fax machine, etc. .
Custom Product: We will manufacture products to meet your specifications and needs. Please contact factory for pricing and delivery.
Should you have any questions or require assistance with the installation, please call 800-526-1556 for technical assistance.